Brembo Sinter Race brake pads front 07BB19SC

Product no.: 12102142

available

39.90
Price incl. VAT, plus delivery


One Set (four single pads) for one caliper. You need two sets for a full exchange.

​Thickness complete: 8.7 mm; height x width: 55.5 x 75.1 mm

​Fits for:

- KTM 690 Duke 2012 - 2013
- KTM 690 Supermoto 2007 - 2009
- KTM 790 Adventure, R 2019 - 2021
- KTM 1050 Adventure 2015 - 2016
- KTM 1190 Adventure, R 2013 - 2016
- KTM 1290 Super Adventure 2015 - 2016
- MV Agusta 675 Brutale 2012 - 2017
- MV Agusta F3 2011-2014
- MV Agusta 800 Bruale Dragster 2015 - 2017
 
(all models with the well known Brembo CNC P4 30/34, 108 mm calipers)
 
Without ABE. Only for track use. 
 
Sinter Racing pads are the classic brake pads for supersport and superbike racing. They were mostly used for trackdays with a streetbike, for practise sessions on the racetrack or for track and road racing. Depending on brake setting and bike they are often choosen by many riders in first place. A little higher wear in comparison to other pads is compensated by a good price-performance ratio. Brembo is offering the highest reputation by longest experience and tremendous success in top motorsport classes.
 
Brake pads are one part of the whole bike setting for the rider. Depending on the rest of the setting, depending on driving skills, depending on budget and intended use, different brake pads may offer the optimum. The differences in possible lap times between from us offered brake pads are to be assumed about a second or less. You find some more difference in wear and price-performance ratio. The individual optimum additionally can strongly depend on the personal feeling for the brake. We suggest therefor to test and use experiences (also from other riders).
 
Changing pads (short manual / suggestion): 
- demount one caliper
- take off the old pads (remove bolts / spring, push out depending on model)
- clean the caliper complete (e.g. with teeth brush an detergent), check wear
- lubrify the pistons with ATE piston paste (e.g. with a 2nd brush)
- push back the pistons
- lubrify the edges and the back side of the pads with copper paste (do not lubrify friction surface)
- put the pads into the caliper like the old ones were in
- assemble the caliper to the bike, check funktion
- do the same with the 2nd caliper
Optional depending on caliper:
- check wear of bolts and springs, if is: replace
- use ceramic paste instead of copper paste (special calipers according to producer)
Always use fresh brake fluid and take care of a clean brake disk.

Accessories

Product Note Status Price
ATE brake cylinder paste 180g ATE brake cylinder paste 180g
12.90 € *
100 ml = 7.17 €
Ceramic paste 50ml Liqui Moly Ceramic paste 50ml Liqui Moly
8.90 € *
Copper paste 100g tube Liqui Moly Copper paste 100g tube Liqui Moly
9.90 € *
*
Prices incl. VAT, plus delivery
Display accessory details

We also recommend

Rock Oil DOT 5.1 brake fluid, 500ml
12.90 *
(1 l = 25.80 €)
*
Prices incl. VAT, plus delivery

Browse these categories as well: Honda CBR 1000 RR - brakes, Honda CBR 600 RR - brakes, Kawasaki ZX-10R - Bremsen, Kawasaki ZX-6R - brakes, Suzuki GSX-R 1000 - brakes, Suzuki GSX-R 600 / 750 - brakes, Triumph Daytona - brakes, Yamaha YZF R1 - Bremsen, Yamaha YZF R6 - brakes