My Account

Switch country/language: Deutschland (Deutsch)

Switch country/language: United Kingdom (English)

Basket

Your basket is empty.

Model

Suzuki GSX-R 600 / 750

Triumph Daytona

Yamaha YZF R1

Yamaha YZF R6

Support

Ferdi_fuer_Shop_2

Ferdinand Schmarje

info@batzang.de

0049 (0) 171 327 1106

DHLLogo

Newsletters

SBS 706 RS racing sinter front brake pads

Product no.: 13262121

available

28.90 €

Price incl. VAT, plus delivery

Description

One Set (two single pads) for one caliper. You need two sets for a full exchange (in most cases).

Thickness complete: 8,6 mm; Höhe x Breite: 55,5 x 74,9 mm

Fits for:

- Aprilia RSV4 RF 2016-2017

- Aprilia Tuono V4 Factory 2016

- MV Agusta F3 675 2011-2016

- MV Agusta F4 800 2014-2016

- MV Agusta Brutale 675, 800, 989R, 990R

- KTM Duke 690 2012-2019

Suits also to:

- Ducati Multistrada 2009-2017

Sinter Racing pads are the classic brake pads for supersport and superbike racing. They were mostly used for trackdays with a streetbike, for practise sessions on the racetrack or for track and road racing. Depending on brake setting and bike they are often choosen by many riders in first place. A little higher wear in comparision to other pads is compensated by a good price-performance ratio. SBS is offering a very high level by long experiences in top motorsport classes.

Brake pads are one part of the whole bike setting for the rider. Depending on the rest of the setting, depending on driving skills, depending on budget and intended use, different brake pads may offer the optimum. The differences in possible lap times between from us offered brake pads are to be assumed about a second or less. You find some more difference in wear and price-performance ratio. The individual optimum additionally can strongly depend on the personal feeling for the brake. We suggest therefor to test and use experiences (also from other riders).

Changing pads (short manual / suggestion):

- demount one caliper

- take off the old pads (remove bolts / spring, push out depending on model)

- clean the caliper complete (e.g. with teeth brush an detergent), check wear

- lubrify the pistons with ATE piston paste (e.g. with a 2nd brush)

- push back the pistons

- lubrify the edges and the back side of the pads with copper paste (do not lubrify friction surface)

- put the pads into the caliper like the old ones were in

- assemble the caliper to the bike, check function

- do the same with the 2nd caliper

Optional depending on caliper:

- check wear of bolts and springs, if is: replace

- use ceramic paste instead of copper paste (special calipers according to producer)

Always use fresh brake fluid and take care of a clean brake disk.