SBS 841 DS Dual Sinter racing brake pads front

Product no.: 14102124

available

104.90
Price incl. VAT, plus delivery


One Set (two single pads) for one caliper. You need two sets for a full exchange.

​Thickness complete: 8.1 mm; height x width: 41.9 x 102.2 mm

Thickness carrier plate: 3.5 mm (SBS 901: Thickness carrier plate 4 mm)

Thickness complete and measurement same as SBS 841  

​Fits for:

- Aprilia RSV4
- Bimota DB7, DB8, DB11
- BMW HP2 / HP4
- Ducati Panigale, 1198, 1098, 848, Desmosedici
- Honda CBR 1000 SP from 2014- ongoing 
Honda CBR1000 RR Fireblade 2014- ongoing
- Kawasaki ZX-10R 2016- ongoing
- Kawasaki ZX-10RR 2017- ongoing
- KTM RC8, Super Duke 1290 R
- MV Agusta F4, F3
- Suzuki GSX-R 1000 / 750 / 600 ab 2011 / 2012 - ongoing
- Triumph Daytona 675R
(alle Modelle mit der bekannten Brembo GP4 / M4 Bremszangen)
 
​Material from World Championship! The improved sinter-technology with depending on manufacturer slightly different processings is the top-standard of brake pad material for racing. Primarily developed for endurance racing, they found their way into all classes of word championships, because of their broad and linear modulation independent from wether conditions and high braking performance. And also the small wear makes them first choice to many teams. SBS is offering state of the art world championship material (e.g. Moto2).
 
Brake pads are one part of the whole bike setting for the rider. Depending on the rest of the setting, depending on driving skills, depending on budget and intended use, different brake pads may offer the optimum. The differences in possible lap times between from us offered brake pads are to be assumed about a second or less. You find some more difference in wear and price-performance ratio. The individual optimum additionally can strongly depend on the personal feeling for the brake. We suggest therefor to test and use experiences (also from other riders).
 
Changing pads (short manual / suggestion):
- demount one caliper
- take off the old pads (remove bolts / spring, push out depending on model)
- clean the caliper complete (e.g. with teeth brush an detergent), check wear
- lubrify the pistons with ATE piston paste (e.g. with a 2nd brush)
- push back the pistons
- lubrify the edges and the back side of the pads with copper paste (do not lubrify friction surface)
- put the pads into the caliper like the old ones were in
- assemble the caliper to the bike, check function
- do the same with the 2nd caliper
Optional depending on caliper:
- check wear of bolts and springs, if is: replace
- use ceramic paste instead of copper paste (special calipers according to producer)
Always use fresh brake fluid and take care of a clean brake disk.

Accessories

Product Note Status Price
ATE brake cylinder paste 180g ATE brake cylinder paste 180g
12.90 € *
100 ml = 7.17 €
Ceramic paste 50ml Liqui Moly Ceramic paste 50ml Liqui Moly
7.90 € *
Copper paste 100g tube Liqui Moly Copper paste 100g tube Liqui Moly
9.90 € *
*
Prices incl. VAT, plus delivery
Display accessory details

We also recommend

*
Prices incl. VAT, plus delivery

Browse these categories as well: Ducati - brakes, Suzuki GSX-R 1000 - brakes, KTM - brakes, MV Agusta - brakes, Aprilia RSV4 - brakes, Suzuki GSX-R 600 / 750 - brakes, BMW S 1000 RR / HP4 - brakes, Honda CBR 1000 RR - brakes, Triumph Daytona - brakes, Kawasaki ZX-10R - Bremsen