SBS 634 Dual Sinter racing brake pads front YZF R1 R6

Product no.: 19102126


Price incl. VAT, plus delivery

One Set (two single pads) for one caliper. You need two sets for a full exchange.

​Thickness complete: 8.8 mm; height x width: 51.3 x 69.2 mm; bolt hole: 6.6 / 8.0 mm

​Fits for:

- Yamaha YZF R1 from 2015 ongoing (RN32 incl. "M")
- Yamaha YZF R1 1998 - 2006 (RN01, RN04, RN09, RN12)
- Yamaha YZF R6 from 1999 ongoing (all: RJ03, RJ05, RJ09, RJ11, RJ15)
- Yamaha YZF R7 OW02
​Material from World Championship! The improved sinter-technology with depending on manufacturer slightly different processings is the top-standard of brake pad material for racing. Primarily developed for endurance racing, they found their way into all classes of word championships, because of thier broad and linear modulation independent from wether conditions and high braking performance. And also the small wear makes them first choice to many teams. SBS is offering state of the art world championship material (e.g. Moto2).
Brake pads are one part of the whole bike setting for the rider. Depending on the rest of the setting, depending on driving skills, depending on budget and intended use, different brake pads may offer the optimum. The differences in possible lap times between from us offered brake pads are to be assumed about a second or less. You find some more difference in wear and price-performance ratio. The individual optimum additionally can strongly depend on the personal feeling for the brake. We suggest therefor to test and use experiences (also from other riders).
Changing pads (short manual / suggestion):
- demount one caliper
- take off the old pads (remove bolts / spring, push out depending on model)
- clean the caliper complete (e.g. with teeth brush an detergent), check wear
- lubrify the pistons with ATE piston paste (e.g. with a 2nd brush)
- push back the pistons
- lubrify the edges and the back side of the pads with copper paste (do not lubrify friction surface)
- put the pads into the caliper like the old ones were in
- assemble the caliper to the bike, check function
- do the same with the 2nd caliper
Optional depending on caliper:
- check wear of bolts and springs, if is: replace
- use ceramic paste instead of copper paste (special calipers according to producer)
Always use fresh brake fluid and take care of a clean brake disk.


Product Note Status Price
ATE brake cylinder paste 180g ATE brake cylinder paste 180g
12.90 € *
100 ml = 7.17 €
Ceramic paste 50ml Liqui Moly Ceramic paste 50ml Liqui Moly
8.90 € *
Copper paste 100g tube Liqui Moly Copper paste 100g tube Liqui Moly
9.90 € *
Prices incl. VAT, plus delivery
Display accessory details

We also recommend

Rock Oil DOT 5.1 brake fluid, 500ml
12.90 *
(1 l = 25.80 €)
Prices incl. VAT, plus delivery

Browse these categories as well: Yamaha YZF R1 - Bremsen, Yamaha YZF R6 - brakes, BATZÄNG racing part - motorcycle tuning parts for racetrack